Republic Airways Practice Test

These questions are part of the practice quiz. Start practicing

• Which of the following speeds is specifically prohibited in Class Bravo while below 10,000 feet?
• When landing on a runway served by a VASI, when is it permissible to descend below the glideslope?
• What type of pre-flight information should pilots familiarize themselves with?
• What happens if you cannot sight the runway after descending below DH?
• What should a pilot confirm when determining the height of an obstacle on the chart?
• What is induced drag a byproduct of?
• What does the term "takeoff decision speed" refer to?
• What is the maximum speed to maintain inside Class Bravo airspace?
• How many nautical miles does the MSA extend?
• What is the equivalent of 15°C in Fahrenheit?
• Below what altitude is the speed limit strictly 250 KIAS?
• What defines the "angle of attack" in aviation?
• What is the designated speed limit below 10,000 feet?
• When conducting an approach, what should pilots regularly review from the approach plate?
• How does an increase in density altitude affect aircraft performance?
• During an approach, what is the critical factor for decision making near DA/MDA?
• What is the primary reason an alternate airport is required for an arrival?
• After landing, when do the runway edge lights turn from white to yellow?
• In Class Bravo airspace, what is the speed limit below 10,000 feet?
• How is turbulence frequency described?
• During what weather conditions would an airport beacon typically operate?
• If given a speed assignment for approach and not yet cleared for approach, when can speed adjustments be made?
• What is a recommended strategy to maintain safety during landing behind a larger aircraft?
• What is the primary effect of stress on a pilot's performance?
• If your groundspeed is 480 knots, how many miles per minute are you traveling?
• What is the best action to take when experiencing a tailwind for optimal aircraft performance?
• What could be a potential issue when rejecting a takeoff after reaching V2?
• What is the maximum distance from the airport that the field altimeter setting should be set?
• Above what altitude must the remaining pilot wear oxygen if the other pilot leaves the flight deck?
• How does a yaw damper function in aircraft with swept wings?
• Which symptom is NOT typically associated with hypoxia?
• What is an essential skill when interpreting METAR reports as a pilot?
• What color and type of lights indicate the touchdown zone?
• What does the term "VASI" stand for?
• What is a primary factor considered during the discussion of engine performance?
• What aids might a pilot rely on for visual guidance during descent?
• What information must be communicated when entering a hold?
• What is a common altitude reference for obstacles on charts?
• What type of speed is referenced when asking if 120 knots is indicated airspeed or ground speed?
• What is the primary purpose of runway edge lights?
• What does V2 represent during takeoff?
• What is the maximum holding speed when cleared to enter a published hold at 16,000'?
• When should a pilot begin to slow down for an assigned holding fix?
• What is the primary use of the TAF in aviation?
• What is a common action taken when smoke is noticed in the flight deck during descent?
• How far does the TAF typically extend in miles around the airport?
• What is the MSA predicated on?
• What must pilots determine when observing current weather from a METAR?
• When considering the necessity of an alternate airport, what operational specifications might influence the decision?
• After passing the final approach fix (FAF) and reporting visibility below minimums, what should you do?
• What type of changes is referred to on the approach plate?
• How far do the touchdown zone lights extend down the runway?
• What is crucial for a pilot to evaluate when reading a METAR or TAF report?
• What is the minimum required visibility to continue an approach?
• What does APU stand for in aviation terms?
• How is clear air turbulence defined?
• In what direction does the horizontal stabilizer produce lift?
• What intensity levels of turbulence are recognized?
• What is required to maintain IFR operations at an airport?
• What does it mean when runway centerline lights change from white to alternating red and white?
• If the temperature and dewpoint are within 2°C of each other, what weather phenomenon would you expect?
• What information should pilots check regarding aircraft performance before a flight?
• What does RVR stand for and how is it measured?
• Does a clearance from Miami tower to land on runway 12, and hold short of runway 09, have to be accepted?
• In terms of approach speed assignments, ATC may assign speeds greater than which limit?
• When should a missed approach be executed according to approach procedures?
• What type of drag does every part of the aircraft contribute to, regardless of lift?
• What is a normal rate of descent for an aircraft on approach?
• Which of the following is NOT a type of fog?
• To avoid wake turbulence while landing behind a larger aircraft, what should you do?
• When can you change your assigned speed of 210 KIAS while being vectored for an approach?
• Which procedure is essential for handling sudden changes in wind during flight?
• What equipment is necessary to operate in RVSM airspace?
• When descending back into visual conditions, where will you see a PAPI or VASI?
• What is the purpose of design maneuvering speed?
• Under what conditions would a takeoff alternate be required?
• What minimum fuel supply is required for an IFR flight?
• What area does the Minimum Safe Altitude (MSA) cover and how much obstacle clearance does it provide?
• What is the recommended action if frost is observed on aircraft surfaces before flight?
• How should the aircraft be managed if a missed approach occurs?
• Which type of fog forms when warm moist air rises over a sloping terrain?
• What should the altimeter be set to when climbing through 18,000'?
• What are the requirements to descend below the MDA/DH?
• What is typically the maximum holding speed at lower altitudes in controlled airspace like Class C?
• Which methodology applies if the ILS glideslope is out of service during an approach?
• What is the maximum holding speed when cleared to enter a published hold at 5,000'?
• What is the speed limit in a procedure turn?
• How would you define a stabilized approach?
• What speed should be maintained when holding at MHA of 6000 feet?
• What geographical area is covered by a TV?
• In which situation is the use of an MEL most critical?
• What does MEL stand for in aviation?
• At what altitude would you intercept the glideslope on an approach plate?
• Which of the following is NOT a level of ice accumulation in flight?
• What topic does 'current aircraft limitations' encompass in aviation?
• If approaching Key West at night, and a pilot sees a beacon flashing white/white/green, what should they do?
• What distinguishes turbulence from chop?
• After descending below the DH and losing sight of the runway, what action should you take?
• What is the role of the Pilot in Command (PIC) regarding ATC clearances?
• If ATC requests you to "maintain best forward speed" in Class Bravo, can you exceed the speed limit?
• At what altitude should a turbine-powered aircraft fly during a visual traffic pattern?
• If visibility falls to 1500' outside of the FAF, what should you do?
• When flying into extremely cold conditions, how does the aircraft's altitude relate to the altimeter indication?
• What does a sign next to the runway with a black background and a white numeral indicate?
• What is the maximum speed limit in Class C and D airspace below 2500 AGL within 4 nautical miles of the airport?
• What indicates that you may continue the approach upon descent?
• What frequency would you attempt to contact on if you lost communication with ATC?
• What is the definition of a ceiling in aviation terms?
• What does UUA indicate in a PIREP?
• What is the maximum operating limitation associated with an APU?
• Can the area behind a displaced threshold be utilized for takeoff?
• Which factor is NOT typically included in a discussion about aircraft performance?
• What is the effect of frost on the aircraft wing?
• What is the appropriate action if you are told to "maintain best forward speed" in Class C airspace?
• How is the concept of critical mach related to wing design?
• What is the standard temperature lapse rate?
• What is the minimum visibility requirement to avoid instrument conditions?
• What color light indicates a safe altitude when approaching a VASI?
• What is needed when departing an airport with weather below IFR minimums?
• What is the holding speed for altitudes between 6001 and 14000 feet?
• What is the role of fusible plugs in aircraft tire assemblies?
• What creates parasitic drag?
• What must you do before descending from 10,000' to 8,000' if you were assigned a speed of 300 KIAS or greater?
• What is one of the visual references required to descend below MDA/DH?
• What does a transponder code of 7600 indicate?
• How would you characterize fusible plugs in relation to aircraft safety?
• What color are the threshold lights used in aviation?
• What does the "1-2-3 rule" pertain to in aviation?
• What essential altitude information is needed to calculate holding speeds during an approach?
• Which requirement must be met by an alternate airport for IFR flights?
• What defines "instrument conditions"?
• In the event of a missed approach, what is assessed to determine the correct entry into holding?
• What is adverse yaw?
• What are the standard takeoff minimums under Part 121 for an aircraft with two engines or less?
• What is Dutch roll in aircraft dynamics?
• What does D-ATIS on the approach plate indicate?
• What can be seen to indicate you may descend below 100' AGL?
• How long should a passenger refrain from flying after diving requiring a controlled ascent?
• What is a microburst?
• Which type of briefing is determined by the ILS approach plate?
• How should a pilot address a co-pilot's technique that contradicts company standard operating procedures?
• What clearance is guaranteed by the MSA?
• What aspect of aircraft performance refers to the efficiency of fuel consumption?
• How often are VOR checks required for IFR operations?
• What differentiates "descend and maintain FL240" from "Pilot's Discretion to FL240"?
• Are cloud heights reported in AGL or MSL?
• Where does the touchdown zone of the runway begin and end?
• What are the altitude limits for Class A airspace?
• How can a pilot illuminate pilot-controlled lighting?
• What determines whether DME is provided by the ILS?
• If visibility falls below prescribed limits inside the FAF, what is allowed?
• What defines the missed approach point in a non-precision approach?
• How can V1 be defined in aviation terminology?
• What does airport beacon operation during the day indicate?
• Where does Reduced Vertical Separation Minimum (RVSM) airspace begin?
• What is the standard timing for the inbound leg of a hold below 14,000 feet?
• What are 'current aircraft memory items' primarily used for?
• What is virga and what is it associated with?
• Which of the following is a consideration when rejecting a takeoff beyond V2?
• What must a pilot demonstrate to properly apply the 1-2-3 rule during flight planning?
• What is the missed approach procedure for a specific approach?
• At what altitude can you begin turning towards your first fix or heading after departure?
• What does NOTAM stand for in aviation terms?
• What should be done if smoke is observed on the flight deck during descent?
• Why is it critical to know the weather at the alternate airport before arrival?
• How does fatigue impact a pilot's ability to fly?
• What is the primary function of an oil-to-fuel heat exchanger?
• When can you start a descent from an assigned altitude while on an approach?
• When beginning an approach, what is controlling?
• What is required at all times regardless of altitude when operating within Class B airspace?
• Why do aircraft wings have a swept design?
• Why is it important to decrease cruise speed in a tailwind situation?
• When can a pilot exit onto a crossing runway after landing?
• What is one of the factors included in the IMSAFE checklist?
• What is the speed limit for a holding pattern when you enter at 8000'?
• If ATC has cleared you to cross MARRC intersection at FL180, do you need to adhere to this once given a descent clearance by a new controller?
• What action should a pilot take when the aircraft is not stabilised before 1000' AGL?
• What is the Minimum Vectoring Altitude?
• What can be expected when the temperature and dew point are close together?
• What is the holding speed for altitudes above 14000 feet?
• What is meant by the term "holdover time" in aviation?
• What is the factor used to determine the distance from the FAF to the runway on the profile view?
• What is the transponder code for lost communication?
• To what distance does the Localizer signal provide guidance?
• What pavement markings are visible when holding short of the runway?
• During a pre-flight walk-around, what should you do if you notice frost on the engine nacelle?
• What leads to an increase in induced drag?
• What is the purpose of the FAF in an ILS approach?
• What are the four levels of ice accumulation in flight?
• What is hypoxia?
• Upon reaching the DA/MDA, what is required to continue the descent to landing?
• Which statement best describes an aircraft system?
• When entering a hold while enroute, is a radio call required?
• What is the transponder code for emergency?
• What is the purpose of ILS in aviation?
• What occurs when an aircraft exceeds the critical angle of attack?
• On a precision approach, what defines the missed approach point?